Instant Sodium Silicate Powder for Foundry Binders
Foundries that bind moulding and core sand name the instant powder grade and the cure route — CO₂ gassing or ester self-set — before a quotation.
Updated
Short answer
The foundry binder quoted here is instant sodium silicate powder: SSP20 (modulus 2.00–2.10), SSP28 (modulus 2.80–2.90) and SSP30 (modulus 3.00–3.10). State the cure route with monthly quantity, packing and destination. Grade is optional. SDS on request. Specification limits shown are qualified grade. TDS, SDS and COA are available on request via RFQ or Contact.
How Instant Sodium Silicate Powder Is Used
- CO₂-cured sodium silicate sand for moulds and cores
- Ester-cured (self-set / no-bake) silicate sand systems
- Cold-box and heated-core silicate binder programs
- Refractory and repair pastes bound with silicate
Benefits for This Industry
- SSP20, SSP28 or SSP30, named against the cure route
- Packing confirmed for foundry consumption
- COA and SDS for the grade ordered
How Our Instant Sodium Silicate Powder Supports This Application
| Formulation need | Product feature | Value to your line |
|---|---|---|
| Match binder to the cure route | SSP20, SSP28 or SSP30 | The modulus follows the core room you run |
| Repeatable core-room results | Qualified-grade limits for SSP20, SSP28 and SSP30 | The batch COA is the figure that ships |
| Foundry-scale consumption | Packing confirmed on the RFQ | Packing matched to foundry usage |
| Process qualification | COA and SDS per shipment | Documentation for process qualification |




Process details for a grade recommendation
Grade selection for this application depends on your process, not on a catalogue number. Send the conditions you already know. A grade is not required, and the recommendation comes back with the reasoning attached.
- Cure route
- CO₂ gassing or ester self-set, as the core room runs it.
- Grade, if you already know it
- SSP20, SSP28 or SSP30. Leave this blank if the core room has not chosen one.
Scope and limits
Performance in your formulation is established by your own trial. These are the limits we hold to.
- We supply the silicate binder raw material to specification; sand quality, additives, and shakeout are foundry process factors we do not certify.
Name SSP20, SSP28 or SSP30 and the cure route for a matched quotation.
Confirm application, monthly quantity, packing, destination port and buyer type on the RFQ form.
Ready to RFQ
A quotation is easier to price with application, monthly quantity (MT), packing, destination port and buyer type. Grade is optional. The form can be sent with an email or a WhatsApp number. Approved TDS, SDS and stamped COA samples are on Downloads; a shipment COA is issued per order. No prices are shown on the form.
- Grade
- Monthly quantity (MT)
- Packing
- Destination port
- Documents needed
FAQ
Which grade should a foundry name?
SSP20, SSP28 or SSP30. State the cure route so the modulus matches the core room. Grade is optional.
Can you supply these grades for a foundry binder program?
Yes. Monthly quantity, packing and destination help us quote faster; grade is optional. COA and SDS are available for the grade ordered.